InTouch™ User Guide
Copyright © 2006 Intermatic, Inc.
Select
Rename Event
,
then press
<ENTER>
. The
screen displays a list of
the events programmed in
your system.
Select the event you want
to rename and press
<ENTER>
. The first letter of
the existing event name
(“E” in “Event 1”) is highlighted.
Scroll with the
<UP/DOWN>
arrows to select the first
character of the new name, then with the
<RIGHT>
arrow to select the second character, and continue.
The characters repeat in a loop in the order shown
below, starting from wherever you are at the time.
There is a “blank space” symbol between the “
~
”
symbol and the “
!
” symbol, as shown below.
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}~ !
”#$%&’()*+,-./0123456789:;<=>?@
NOTE:
To shorten a name or “erase” unwanted
characters, override them with a “blank space”
character.
When you are satisfied with the new name of the
event, press the
<ENTER>
button to highlight
Save
& Close
, then press
<ENTER>
again to complete the
procedure. The display returns to the programming
screen, and automatically exits programming mode
in about 30 seconds if there’s no activity.
3.
4.
5.
6.
>Rename Event
11:25a
My Events
Event 2
Event 1
>Rename Event
11:25a
My Events
Event 2
Event 1
>Rename Event
11:25a
Enter Event Name
E
vent 1
Save & Close
>Rename Event
11:25a
Enter Event Name
E
vent 1
Save & Close
