InTouch™ User Guide
Copyright © 2006 Intermatic, Inc.
Press
<ENTER>
again to
configure the event. The
screen displays a list of
all scenes currently in the
network.
Scroll with the
<UP/DOWN>
arrow buttons to select the
first scene to be controlled by this event, then press
<ENTER>
to place a “
+
” sign marking the scene.
Repeat Step 7 for other scenes you want to be
controlled by this event.
When finished, press the
<DOWN>
arrow button to
advance to the bottom of
the screen to select
Next
,
then press
<ENTER>
. The display will show all devices
currently in the network in their room assignments,
along with their preset settings (i.e., ON, OFF, 50%,
or --- [means “it may be added to the scene at this
point”]).
OPTION:
Though they’re probably OK, you can
make adjustments at this time to the setting on any of
the devices. Scroll with the
<UP/DOWN>
arrow buttons
to select the device you want to change, then press
the
<RIGHT/LEFT>
arrows to adjust the value. You will
have one of three possibilities:
For a switch—ON and OFF.
For a dimmer switch—OFF and a percentage of
ON.
For a switch not in the scene— three dashes (it
may be added to the scene at this point).
Since you’re creating an event that will turn devices
ON, you’re probably going to set everything to ON.
When you are satisfied
with changes or not
making any, scroll with
the
<DOWN>
arrow to
advance to the bottom of the screen and highlight
6.
7.
8.
9.
•
•
•
10.
>Configure Event
Event 1
Scene 2
Scene 3
+Scene 1
11:25a
>Configure Event
Event 1
Scene 2
Scene 3
+Scene 1
11:25a
Event 1
Binary Switch 5
Multi Level Switch 3
OFF
75%
Bathroom1
Bathroom 1
>Configure Event
11:25a
Event 1
Binary Switch 5
Multi Level Switch 3
OFF
75%
Bathroom1
Bathroom 1
>Configure Event
11:25a
What is the event duration?
>Configure Event
11:25a
Next>
Next>
Event 1
Manual Off
What is the event duration?
>Configure Event
11:25a
Next>
Next>
Event 1
Manual Off
