InTouch™ User Guide
Copyright © 2006 Intermatic, Inc.
Breaking the Link between a non-
InTouch Routing Slave Device and
Other Devices
Press and hold (for 4+ seconds) the
<EXCLUDE>
button
on the InTouch Hand-Held. The Status Light on the
Hand-Held will blink with a red light.
Now press the
<ACTIVATION>
button on the routing
slave device.
(In the example, with the motion
sensor and the light switch, press the
<ACTIVATION>
button on the motion sensor.)
If the device has a
Status Light, it may light at this time.
NOTE:
When the link-breaking programming is
finished, the Status Light on the Hand-Held should:
Blink BLUE once if programming was successful.
Blink RED once if programming failed. Refer to
the Troubleshooting Section of this Manual for
additional information.
1.
2.
•
•
