InTouch™ User Guide
Copyright © 2006 Intermatic, Inc.
To set exact time, scroll with the
<UP/DOWN>
arrows to set today’s sunrise time, then press the
<RIGHT>
arrow.
To skip setting exact time, press the
<RIGHT>
arrow
to bypass the step.
In either case, the screen displays a computed time
for sunset, as shown.
Recommended:
As with sunrise, you can enter the
exact time for sunset. Scroll with the
<UP/DOWN>
arrows to set the exact sunset time, then press the
<RIGHT>
arrow, or press the
<RIGHT>
arrow to bypass
the step. In either case, the cursor highlights
Save &
Close
.
Press
<ENTER>
. Your settings are saved and the Main
Menu screen reappears. After a few seconds, the
Home Screen reappears, displaying the correct time.
Grouping Devices into Rooms
Overview
A
room
is a group of devices that:
Have been installed inside a room of the house, or
Will be controlled by scenes programmed for a room
of the house, both inside and outside the room.
In this case, for example, you might also include
a hallway light located outside the room along
with the devices inside the room since you plan to
program scenes that will control the hallway light as
well.
To group devices into rooms, you must first add devices
to the network (see page
14
), create the rooms, and
then add the appropriate devices to the rooms you have
created.
•
•
14.
15.
•
•
