Interlogix TVR-1004-1T, User Manual

Page: 82 / 109

Chapter 5: Advanced setup
78 TruVision DVR 10 User Manual
2. Click Delete.
3. Repeat steps 1 to 2 for additional presets you want to delete.
4. Click Return to return to the PTZ screen.
5. Click Confirm on the PTZ screen to save all changes.
Preset tour setup
Each preset tour is made up of several preset points. A preset point includes:
• A preset position.
• A dwell time. This is the time duration when the PTZ camera stays at the
preset position.
• A dwell speed. This is the speed at which the PTZ moves to the preset
position.
You can save up to 16 preset tour sequences. Make sure your PTZ supports the
preset tour function before you configure your preset tours.
Note: The TVR 10 does not support preset tours for Interlogix domes.
To display the Preset Tour Setup screen, click Preset Tour Setup on the PTZ
screen. The Preset Tour Setup screen displays as shown in Figure 31 below.
Note: The instructions below do not cover all PTZs.
Figure 31: Preset sequence screen
To define a preset tour sequence:
1. Click Preset Tour Setup on the PTZ screen to open the Preset Tour Setup
screen.