Interlogix TVR-1004-1T, User Manual

Page: 79 / 109

Chapter 5: Advanced setup
TruVision DVR 10 User Manual 75
• PTZ parameters (including baud rate, data bits, stop bits, parity, and flow
control)
• PTZ protocol
• PTZ address
• Preset parameters
• Preset tour
• Shadow tour
To display the PTZ screen, click PTZ on the main menu.
Figure 30: PTZ screen
PTZ screen options
Table 21 below describes the PTZ screen options.
Table 21: PTZ screen options
Option Description
Select camera Selects a PTZ camera.
PTZ parameters Parameters include: baud rate, data bit, stop bit, parity, and flow
control. These parameters must be the same as the PTZ protocols.
PTZ address Specifies the PTZ address. Each PTZ has a different address.
PTZ type Specifies the PTZ protocols. See
Appendix D
“
PTZ protocols
” on page
99 for a list of PTZ types.
Note: If you select the Pelco-P protocol, define the PTZ address
plus or minus 1 the Camera ID. For example, if the camera ID is 2,
the TVR 10 PTZ address should be set as 3.