
Chapter 5: Advanced setup
TruVision DVR 10 User Manual
71
Note:
When a network parameter is modified, the TVR 10 will prompt you to
save and reboot the unit.
To display the Network screen, click Network. The Network screen displays as
shown in Figure 27 below.
Figure 27: Network setup
Network settings
Table 19 below describes the Network screen options.
Table 19: Network screen options
Option
Description
IP address
Specifies the network’s IP address. The IP address configured here must
not conflict with another IP address. If there is a DHCP server within the
network, you can set the IP as “0.0.0.0” then save and reboot the TVR 10. In
the reboot process, the TVR 10 searches the DHCP server and retrieves
one dynamic IP address. This value displays as the dynamic IP address. If
the TVR 10 is utilizing the PPPoE function, the TVR 10 also connects to the
Internet and this value displays as the dynamic internet IP address. Default
value is 192.168.111.111.
Port
Specifies the network access port number. This value must be greater than
2000.
Mask
Specifies the subnet mask. Default value is 255.255.255.0.
Gateway
Specifies the gateway IP address. The gateway IP is used to communicate
in different network segments.
Http Port
Specifies the port used for the Internet Explorer (IE) browser. The default
value is 80. This value can be modified.
Summary of Contents for TVR-1004-1T
