Interlogix TVR-1004-1T, User Manual

Page: 67 / 109

Chapter 5: Advanced setup
TruVision DVR 10 User Manual 63
Option Description
Frame Rate Specifies the frame rate for the selected resolution.
Options include: 25 (PAL)/30 (NTSC) 22, 20, 18, 16, 15
，
12, 10, 8, 6, 4, 2,
and 1.
Pre-Event Time This option is used if you have the motion detection and/or external alarms
enabled. Pre-event time refers to the time recorded before a motion or
external alarm is triggered and includes the alarm data. If a motion or
external alarm occurs and you have set the pre-event time to 5 seconds, the
TVR 10 will record and save up to 5 seconds prior to the alarm event. Pre-
event time options include: No Prerecord, 5 (default), 10, 15, 20, 25, 30
seconds, and Max Prerecord. Max Prerecord lets you save all data in the
Prerecord buffer.
Pre-event time relates to the bit rate in that the lower the bit rate, the longer
the actual pre-event time.
Post-Event Time This option is used if you have the motion detection and/or external alarms
enabled. When an external or motion alarm is cleared, the TVR 10 will
continue recording based on the value specified in this option. Options
include: 5 (default), 10, 30 seconds, 1, 2, 5, and 10 minutes.
Record Enables or disables recording for the selected camera.
Schedule Defines a recording schedule when you enable camera recording.
When you modify the camera recording schedule, you must reboot TVR 10
to implement the changes.
Defining a recording schedule
When enabling a camera for recording, you can define a recording schedule for
the selected cameras. You will be prompted to reboot the TVR 10 after making
any schedule modifications. Use the Recording Schedule screen to define a
schedule as shown in Figure 24 on page 64.