Interlogix TVR-1004-1T, User Manual

Page: 66 / 109

Chapter 5: Advanced setup
62 TruVision DVR 10 User Manual
Figure 23: Recording channel configuration
Record mode
This option lets you specify how the TVR 10 responds when the HDD becomes
full. Select Stop Recording to trigger a Hard Disk Full exception. Recording will
not continue if the HDD is full and you have the Stop recording option selected.
Select Overwrite to overwrite the earliest recorded files when the HDD is full to
continue recording.
Camera recording
This option lets you specify the camera for which you want to define the
recording configuration. Use the Up or Down Arrow buttons to select a camera.
Table 17 below lists the recording options you can configure for your camera.
Table 17: Camera recording options
Option Description
Stream Type Specifies the stream type you wish to record. Select Video to record video
stream only. Select Audio&Video to record both video and audio streams.
Resolution Specifies the recording resolution. A higher image resolution provides a
higher image quality but also requires a higher bit rate. The camera
resolution ranges from QCIF (lowest) up to 4CIF (highest).
If you make changes to this option, you must reboot the TVR 10 to
implement the changes.
Bit rate Specifies the maximum bit rate. Recommended bit rate depends on the
camera resolution.