Interlogix TVR-1004-1T, User Manual

Page: 71 / 109

Chapter 5: Advanced setup
TruVision DVR 10 User Manual 67
Note: In order for a camera to record an alarm, the recording option and type
must be enabled on the Schedule screen. See “Defining a recording
schedule” on page 63 for more information.
5. Define your alarm handling schedule.
In the Alarm Schedule section of the Alarm In Handling screen, define a
schedule for when the TVR 10 will respond to an external alarm. Select the
day of the week and under Period 1 enter the start and end time periods for
the selected day.
6. Specify your response method.
Select how you want to be notified of an external alarm. Check one or more of
the following response methods:
Full Screen. Displays the alarm on the screen.
Buzzer. An audible alarm sounds.
Upload to Client. This feature is currently not supported.
Alarm Out. Triggers an alarm output. Up to four alarm outputs can be
enabled.
7. Click Confirm to save your settings and return to the Alarms screen.
Note: The TVR 10 prompts you to reboot in order for the schedule to take
effect.
8. Set a PTZ link to the alarm.
In the Alarms screen, click PTZ Rules to display the PTZ Rules screen, as
shown in the figure below.
Select a camera, and then click one or more of following PTZ linkages:
Preset, Preset tour, Enable Cruise (shadow tour). When an option is enabled,