Interlogix TVR-1004-1T, User Manual

Page: 56 / 109

Chapter 5: Advanced setup
52 TruVision DVR 10 User Manual
To define the tamper alarm response:
1. In the Advanced Settings screen, click Camera Tamper Area to display the
Camera Tamper Rules screen.
2. Define an alarm schedule.
The system’s handling of a camera tamper alarm depends on the alarm
schedule. In the Rules screen, select the day of the week in the Alarm
Schedule list box for which you want to set the response time schedule. Enter
the time period for the response in the Period edit boxes. You can enter up to
four time periods for each day of the week.
3. Select a response method.
Check a response method for the system when a camera tamper alarm is
triggered. You can check one or more response methods including:
Full Screen. Displays the alarm on the screen.
Buzzer. An audible alarm sounds.
Upload to Client. This feature is currently not supported.
Alarm Out. Triggers an alarm output. Up to four alarm outputs can be
enabled.
Check or use the Up or Down Arrow buttons and the ENTER button to enable
or disable these options.
4. Click Confirm on the Rules screen to save your setup.
Note: The TVR 10 will prompt you to reboot in order for the schedule to take
effect.
Video loss alarm
The TVR 10 lets you define video loss alarms. A video loss alarm refers to an
alarm triggered when a video signal is lost or corrupt due to power failure, video
cable failure, bad connection, and more. The video loss alarm triggers only if the
video loss occurs during a programmed time schedule. The Video Loss screen
lets you define video loss alarms as shown in Figure 20 on page 53. The alarm
displays on the status bar of the screen.