![background image](http://html1.mh-extra.com/html/interlogix/tvr-1004-1t/tvr-1004-1t_user-manual_2076891078.webp)
Chapter 5: Advanced setup
74
TruVision DVR 10 User Manual
DDNS setup
Use the DDNS setup screen (shown in Figure 29 below) to define the settings for
the DDNS function. Before you can configure the DDNS settings, you must first
create an account through the DynDNS Web site (www.dyndns.com).
Figure 29: DDNS setup
To define the DDNS settings:
1. Click DDNS Setup on the Network screen to display the DDNS Setup screen.
2. Ensure that the protocol is set to DynDns.
3. Enter the server address and server port.
4. Enter the host name as created through the DynDns Web site.
5. Enter the user name for the account you created through the DynDns Web
site.
6. Enter the password for the account.
7. Enter the password on the Verify field to verify your password.
8. Click Confirm to save your settings. The TVR 10 prompts you to reboot.
PTZ settings
Use the PTZ screen, shown as Figure 30 on page 75, to define PTZ functions for
cameras connected to your TVR 10. An RS-485 port is available at the TVR 10
back panel for PTZ control. You can define RS-485 settings to match your PTZ
protocol such as:
Summary of Contents for TVR-1004-1T
