![background image](http://html.mh-extra.com/html/interlogix/ns4702-24p-4s-4x/ns4702-24p-4s-4x_user-manual_2077364075.webp)
75
Buttons
: Click to use the alternate image. This button may be disabled depending on system state.
4.2.24 Factory Default
You can reset the configuration of the Managed Switch on this Page. Only the IP configuration is retained. The new configuration is
available immediately, which means that no restart is necessary. The Factory Default screen in
Figure 4-2-29
appears.
Figure 4-2-29:
Factory Default Page Screenshot
Buttons
: Click to reset the configuration to Factory Defaults.
: Click to return to the Port State Page without resetting the configuration.
To reset the Managed Switch to the Factory default setting, you can also press the hardware reset button
at the front panel about 10 seconds. After the device be rebooted. You can login the management WEB
interface within the same subnet of 192.168.0.xx.
Summary of Contents for NS4702-24P-4S-4X
