manualshive.com logo in svg

Interlogix NS4702-24P-4S-4X, User Manual, Page: 135 / 432

Share
Download
Interlogix NS4702-24P-4S-4X User Manual Download Page 135

 

135 

 

 

Figure 4-6-14: 

VLAN Overlap Port Setting &

 

VLAN 1 – The Public Area Member Assign 

 

That is, although the VLAN 2 members: Port-1 to Port-3 and VLAN 3 members: Port-4 to Port-6 also belongs to VLAN 1. But with 

different PVID settings, packets form VLAN 2 or VLAN 3 is not able to access to the other VLAN. 

6.  Repeat Steps 1 to 6, set up the VLAN Trunk port at the partner switch and add more VLANs to join the VLAN trunk, repeat Steps 

1 to 3 to assign the Trunk port to the VLANs. 

 

4.6.10.3 Port Isolate 

The diagram shows how the Managed Switch handles isolated and promiscuous ports, and the each PC is not able to access the 

isolated port of each other’s PCs. But they all need to access with the same server/AP/Printer. This section will show you how to 

configure the port for the server – that could be accessed by each isolated port. 

 

Summary of Contents for NS4702-24P-4S-4X

















































































































































































































































































































































































































































Reviews:

No comments