Interlogix NS4702-24P-4S-4X Page 168 User Manual Download

Page: 168 / 432

168

4.8.2 Profile Table

This page provides IPMC Profile related configurations. The IPMC profile is used to deploy the access control on IP multicast

streams. It is allowed to create at maximum 64 Profiles with at maximum 128 corresponding rules for each. The Profile Table screen

in Figure

4-8-5

appears.

Figure 4-8-5:

IPMC Profile Configuration Page

The Page includes the following fields:

Object

Description



Global Profile Mode

Enable/Disable the Global IPMC Profile.

System starts to do filtering based on profile settings only when the global profile

mode is enabled.



Delete

Check to delete the entry.

The designated entry will be deleted during the next save.



Profile Name

The name used for indexing the profile table.

Each entry has the unique name which is composed of at maximum 16

alphabetic and numeric characters. At least one alphabet must be present.



Profile Description

Additional description, which is composed of at maximum 64 alphabetic and

numeric characters, about the profile.

No blank or space characters are permitted as part of description. Use "_" or "-"

to separate the description sentence.



Rule

When the profile is created, click the edit button to enter the rule setting page of

the designated profile. Summary about the designated profile will be shown by

clicking the view button. You can manage or inspect the rules of the designated

Summary of Contents for NS4702-24P-4S-4X

















































































































































































































































































































































































































































Search results

Summary of Contents for NS4702-24P-4S-4X

Reviews:

Related manuals for NS4702-24P-4S-4X

Brands by name

Popular brands

Interlogix NS4702-24P-4S-4X, User Manual

Search results

Summary of Contents for NS4702-24P-4S-4X

Reviews:

Related manuals for NS4702-24P-4S-4X

Brands by name

Popular brands