Interlogix NS4702-24P-4S-4X Page 70 User Manual Download

Page: 70 / 432

Do not quit the Firmware Upgrade Page without pressing the “

” button after the image is

loaded. Or the system won’t apply the new firmware. User has to repeat the firmware

upgrade processes.

4.2.17 TFTP Firmware Upgrade

The

Firmware Upgrade

Page provides the functions to allow a user to update the Managed Switch firmware from the TFTP server

in the network. Before updating, make sure you have your TFTP server ready and the firmware image is on the TFTP server. The

TFTP Firmware Upgrade screen in

Figure 4-2-21

appears.

Figure 4-2-20:

TFTP Firmware Update Page Screenshot

The Page includes the following fields:

Object

Description



TFTP Server IP

Fill in your TFTP server IP address.



Firmware File Name

The name of firmware image.

(Maximum length : 24 characters)

Buttons

: Click to upgrade firmware.

DO NOT Power OFF

the Managed Switch until the update progress is complete.

Do not quit the Firmware Upgrade Page without pressing the “

” button after the image is

loaded. Or the system won’t apply the new firmware. User has to repeat the firmware

upgrade processes.

Summary of Contents for NS4702-24P-4S-4X

















































































































































































































































































































































































































































Search results

Summary of Contents for NS4702-24P-4S-4X

Reviews:

Related manuals for NS4702-24P-4S-4X

Brands by name

Popular brands

Interlogix NS4702-24P-4S-4X, User Manual

Search results

Summary of Contents for NS4702-24P-4S-4X

Reviews:

Related manuals for NS4702-24P-4S-4X

Brands by name

Popular brands