Interlogix NS4702-24P-4S-4X User Manual Download Page 140

Page: 140 / 432

140



Value

Valid value that can be entered in this text field depends on the option selected

from the the preceding Frame Type selection menu.

Below is the criteria for three different Frame Types:

For Ethernet

: Values in the text field when Ethernet is selected as a

Frame Type is called etype. Valid values for etype ranges from

0x0600-0xffff

For LLC

: Valid value in this case is comprised of two different

sub-values.

DSAP

: 1-byte long string (0x00-0xff)

SSAP

: 1-byte long string (0x00-0xff)

For SNAP

: Valid value in this case also is comprised of two different

sub-values.

OUI

: OUI (Organizationally Unique Identifier) is value in format of

xx-xx-xx where each pair (xx) in string is a hexadecimal value

ranges from 0x00-0xff.

PID

: If the OUI is hexadecimal 000000, the protocol ID is the

Ethernet type (EtherType) field value for the protocol running on top

of SNAP; if the OUI is an OUI for a particular organization, the

protocol ID is a value assigned by that organization to the protocol

running on top of SNAP.

In other words, if value of OUI field is 00-00-00 then value of PID will be

etype (0x0600-0xffff) and if value of OUI is other than 00-00-00 then valid

value of PID will be any value from 0x0000 to 0xffff.



Group Name

A valid Group Name is a unique 16-character long string for every entry which

consists of a combination of alphabets (a-z or A-Z) and integers(0-9).

Note

: special character and underscore(_) are not allowed.



Adding a New Group to

VLAN mapping entry

Click “Add New Entry”to add a new entry in mapping table. An empty row is

added to the table; Frame Type, Value and the Group Name can be configured

as needed.

The “Delete” button can be used to undo the addition of new entry.

Buttons

: Click to add a new entry in mapping table.

: Click to apply changes

: Click to undo any changes made locally and revert to previously saved values.

Auto-refresh

: Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.

Summary of Contents for NS4702-24P-4S-4X

















































































































































































































































































































































































































































Search results

Summary of Contents for NS4702-24P-4S-4X

Reviews:

Interlogix NS4702-24P-4S-4X, User Manual, Page: 140 / 432

Search results

Summary of Contents for NS4702-24P-4S-4X

Reviews: