Interlogix NS4702-24P-4S-4X, User Manual

Page: 338 / 432

338
Coordinates Location
Object Description

Latitude Latitude
SHOULD be normalized to within 0-90 degrees with a maximum of 4
digits.
It is possible to specify the direction to either
North
of the equator or
South
of the
equator.

Longitude Longitude
SHOULD be normalized to within 0-180 degrees with a maximum of 4
digits.
It is possible to specify the direction to either
East
of the prime meridian or
West
of the prime meridian.

Altitude
Altitude
SHOULD be normalized to within -32767 to 32767 with a maximum of 4
digits.
It is possible to select between two altitude types (floors or meters).
Meters
: Representing meters of Altitude defined by the vertical datum specified.
Floors
: Representing altitude in a form more relevant in buildings which have
different floor-to-floor dimensions. An altitude = 0.0 is meaningful even outside a
building, and represents ground level at the given latitude and longitude. Inside a
building, 0.0 represents the floor level associated with ground level at the main
entrance.

Map Datum
The
Map Datum
used for the coordinates given in this Option

WGS84
: (Geographical 3D) - World Geodesic System 1984, CRS Code
4327, Prime Meridian Name: Greenwich.

NAD83/NAVD88
: North American Datum 1983, CRS Code 4269, Prime
Meridian Name: Greenwich; The associated vertical datum is the North
American Vertical Datum of 1988 (NAVD88). This datum pair is to be used
when referencing locations on land, not near tidal water (which would use
Datum = NAD83/MLLW).

NAD83/MLLW
: North American Datum 1983, CRS Code 4269, Prime
Meridian Name: Greenwich; The associated vertical datum is Mean Lower
Low Water (MLLW). This datum pair is to be used when referencing locations
on water/sea/ocean.