manualshive.com logo in svg

Interlogix NS4702-24P-4S-4X, User Manual, Page: 125 / 432

Share
Download
Interlogix NS4702-24P-4S-4X User Manual Download Page 125

 

125 

 

 

VLAN Membership

 

The VLAN Membership Status Page shall show the current VLAN port members 

for all VLANs configured by a selected VLAN User (selection shall be allowed by 

a Combo Box). When ALL VLAN Users are selected, it shall show this 

information for all the VLAN Users, and this is by default. VLAN membership 

allows the frames classified to the VLAN ID to be forwarded on the respective 

VLAN member ports. 

 

Buttons 

: Select VLAN Users from this drop down list. 

Auto-refresh 

: Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.

 

: Click to refresh the Page immediately. 

: Updates the table starting from the first entry in the VLAN Table, i.e. the entry with the lowest VLAN ID. 

: Updates the table, starting with the entry after the last entry currently displayed. 

Summary of Contents for NS4702-24P-4S-4X

















































































































































































































































































































































































































































Reviews:

No comments