manualshive.com logo in svg

Interlogix NS4702-24P-4S-4X, User Manual

The Interlogix NS4702-24P-4S-4X is a high-performance networking device designed for seamless data transmission. Ensure a hassle-free setup with the included Quick Start Manual, available for free download at manualshive.com. This comprehensive manual provides step-by-step instructions and valuable insights, empowering users to maximize the potential of their Interlogix device.

Share
Download
background image

 

141 

 

: Click to refresh the Page immediately. 

4.6.14 Protocol-based VLAN Membership 

This Page allows you to map a already configured Group Name to a VLAN for the switch. The Group Name to VLAN Mapping Table 

screen in 

Figure 4-6-22

 appears. 

 

Figure 4-6-22:

 Group Name to VLAN Mapping Table Page Screenshot 

 

The Page includes the following fields: 

Object 

Description 

 

Delete 

To delete a Group Name to VLAN map entry, check this box. The entry will be 

deleted on the switch during the next Save 

 

Group Name 

A valid Group Name is a string of atmost 16 characters which consists of a 

combination of alphabets (a-z or A-Z) and integers(0-9), no special character is 

allowed. Whichever Group name you try map to a VLAN must be present in 

Protocol to Group mapping table and must not be preused by any other existing 

mapping entry on this Page. 

 

VLAN ID 

Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges 

from 1-4095. 

 

Port Members 

A row of check boxes for each port is displayed for each Group Name to VLAN ID 

mapping. To include a port in a mapping, check the box. To remove or exclude 

the port from the mapping, make sure the box is unchecked. By default, no ports 

are members, and all boxes are unchecked. 

 

Adding a New Group to 

VLAN mapping entry 

Click “Add New Entry” to add a new entry in mapping table. An empty row is 

added to the table, the Group Name, VLAN ID and port members can be 

configured as needed. Legal values for a VLAN ID are 1 through 4095. 

The “Delete” button can be used to undo the addition of new entry.

 

 

 

 

Summary of Contents for NS4702-24P-4S-4X

















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NS4702-24P-4S-4X

Edimax GS-1016 Datasheet preview
GS-1016
Brand: Edimax Pages: 2
ORVIBO ZigBee Mini Hub Faq preview
ZigBee Mini Hub
Brand: ORVIBO Pages: 3
Black Box CATx Technical Specifications preview
CATx
Brand: Black Box Pages: 4
Cardin Elettronica SEL Series Quick Start Manual preview
SEL Series
Brand: Cardin Elettronica Pages: 2
SignaMax I-120 Series Quick Start Manual preview
I-120 Series
Brand: SignaMax Pages: 2
TRENDnet TK-215i User Manual preview
TK-215i
Brand: TRENDnet Pages: 16
Metrix SW6000 Installation Manual preview
SW6000
Brand: Metrix Pages: 12
Z-Band ZBT0100052 User Manual And Installation Manual preview
ZBT0100052
Brand: Z-Band Pages: 13
Vega VEGAWAVE S 61 Operating Instructions Manual preview
VEGAWAVE S 61
Brand: Vega Pages: 44
Blackmagicdesign Universal Videohub 288 Installation And Operation Manual preview
Universal Videohub 288
Brand: Blackmagicdesign Pages: 107
Black Box SW421A-R2 Specifications preview
SW421A-R2
Brand: Black Box Pages: 2
Uponor Smatrix Wave Plus Uahome Module R-167 Installation And Operation Manual preview
Smatrix Wave Plus Uahome Module R-167
Brand: Uponor Pages: 48
Talkswitch CT.TS005.501401 Quick Manual preview
CT.TS005.501401
Brand: Talkswitch Pages: 9
Sandberg Mini Hub 5 port Quick Start Manual preview
Mini Hub 5 port
Brand: Sandberg Pages: 12
Maiwe MIEN2206 User Manual preview
MIEN2206
Brand: Maiwe Pages: 14
Intellinet 560757 User Manual preview
560757
Brand: Intellinet Pages: 12
WIKA OLS-5200 Operating Instructions Manual preview
OLS-5200
Brand: WIKA Pages: 52
Danfoss RT 30AW Installation Manual preview
RT 30AW
Brand: Danfoss Pages: 2

Brands by name

Popular brands

Load more brands