113
4.6 VLAN
4.6.1 VLAN Overview
A Virtual Local Area Network (VLAN)
is a network topology configured according to a logical scheme rather than the physical
layout. VLAN can be used to combine any collection of LAN segments into an autonomous user group that appears as a single LAN.
VLAN also logically segment the network into different broadcast domains so that packets are forwarded only between ports within
the VLAN. Typically, a VLAN corresponds to a particular subnet, although not necessarily.
VLAN can enhance performance by conserving bandwidth, and improve security by limiting traffic to specific domains.
A VLAN is a collection of end nodes grouped by logic instead of physical location. End nodes that frequently communicate with each
other are assigned to the same VLAN, regardless of where they are physically on the network. Logically, a VLAN can be equated to
a broadcast domain, because broadcast packets are forwarded to only members of the VLAN on which the broadcast was initiated.
1.
No matter what basis is used to uniquely identify end nodes and assign these nodes VLAN
membership, packets cannot cross VLAN without a network device performing a routing
function between the VLAN.
2.
The Managed Switch supports IEEE 802.1Q VLAN. The port untagging function can be used
to remove the 802.1 tag from packet headers to maintain compatibility with devices that are
tag-unaware..
The Managed Switch's default is to assign all ports to a single 802.1Q VLAN named
DEFAULT_VLAN. As new VLAN is created, the member ports assigned to the new VLAN will be
removed from the DEFAULT_ VLAN port member list. The DEFAULT_VLAN has a VID = 1.
This section has the following items:
VLAN Port Configuration
Enables VLAN group
VLAN Membership Status
Displays VLAN membership status
VLAN Port Status
Displays VLAN port status
Private VLAN
Creates/removes primary or community VLANs
Port Isolation
Enables/disablse port isolation on port
MAC-based VLAN
Configures the MAC-based VLAN entries
MAC-based VLAN Status
Displays MAC-based VLAN entries
Protocol-based VLAN
Configures the protocol-based VLAN entries
Protocol-based VLAN
Membership
Displays the protocol-based VLAN entries
Summary of Contents for NS4702-24P-4S-4X
