IntelliBar M Series Extensions to HP PCL Commands 2-11
Setting the Optional Check Digit to 2 has the following effect:
Codabar calculates Mod 10 checksum.
MSI Plessey calculates 1 Mod 11 and Mod 10 checksum.
PDF417 Bar Code
PDF417 bar code capability is implemented with the following features.
Additional # for Bar Code Type selection:
ESC!b#c – Set Bar Code Type, where # is:
17 = PDF417 type bar code
Escape sequences:
ESC!b#B – Enable/disable Binary Only Mode, where # is:
0 – disable Binary Only Mode (default)
1 – enable Binary Only mode (determinant symbol size)
ESC!b#D – Set RESOLUTION for encoding data to printer.
Default = 100 DPI
Range: 75, 100, 150, 300
ESC!b#F – Enable/Disable TRUNCATED PDF symbols.
0 – disable Truncated Mode (default)
1 – enable Enable Truncated Mode
ESC!b#L – Set ECC (Error Correction Code) LEVEL
Default = 0 (i.e. Use Percentage command “ESC!b#P”).
Range: 0 through 8
ESC!b#P – Set ECC LEVEL as a PERCENTAGE of data code words
Default = 10 (10% of data code words).
Range: 0 through 400
ESC!b#Q – Set mode for stripping bits to compensate for bleeding.
0 – no reduction (default)
1 – reduce Bar Height (only valid if Y SCALE > 1)
2 – reduce Bar Width (only valid if X SCALE > 1)
3 – reduce both Bar Height and Bar Width(valid as above)
ESC!b#U – Set Row count used for sizing a PDF symbol.
Default = 0
Range: 0, 3 through 90
Summary of Contents for Intellibar M412
Page 115: ...9 2 HP PCL Graphics Commands Figure 9 1 Star Shaped Raster Image...
Page 122: ...HP PCL Graphics Commands 9 9 Figure 9 4 Example of Raster Graphic Image Data...
Page 126: ...HP PCL Graphics Commands 9 13 Figure 9 6 Shading Levels...
Page 127: ...9 14 HP PCL Graphics Commands Figure 9 7 Fill Patterns...
