HP PCL Graphics Commands 9-17
This example prints the following (see Figure 9-9):
Figure 9-9 Shaded Fill Example
To print a 3- x 5-inch rectangular area filled with a horizontal line pattern, perform the
following steps:
1.
Position the cursor:
ESC*p300x400Y
This moves the cursor to dot position (300, 400) within the PCL coordinate
systems.
2.
Specify the width of the rectangle:
ESC*c900A
This sets the rectangle width to 900 dots (3 inches).
3.
Specify the height of the rectangle:
ESC*c1500B
This sets the rectangle height to 1500 dots (5 inches).
4.
Specify the area fill ID:
ESC*c1G
This sets the area fill ID to 1.
5.
Print the rectangular pattern-filled area:
ESC*c3P
This example prints the following (see Figure 9-10):
Summary of Contents for Intellibar M412
Page 115: ...9 2 HP PCL Graphics Commands Figure 9 1 Star Shaped Raster Image...
Page 122: ...HP PCL Graphics Commands 9 9 Figure 9 4 Example of Raster Graphic Image Data...
Page 126: ...HP PCL Graphics Commands 9 13 Figure 9 6 Shading Levels...
Page 127: ...9 14 HP PCL Graphics Commands Figure 9 7 Fill Patterns...
