9-20 HP PCL Graphics Commands
Select Pattern Transparency Mode
ESC*v0O (transparent)
Decimal 027 042 118 048 079
Hex:
1B 2A 76 30 43
ESC*v1O (opaque)
Decimal 027 042 118 049 079
Hex:
1B 2A 76 31 43
This command sets the pattern’s transparency mode to transparent or opaque. A
transparency mode of “0” (transparent) means that the white regions of the pattern image
are not copied onto the destination. A transparency mode of “1” (opaque) means that the
white pixels in the pattern are applied directly onto the destination.
Select Pattern Command
ESC*v#T
Decimal:
027 042 118 ### 084 (### = 048 through 051)
Hex:
1B 2A 76 ## 54 (## = 30 through 32)
#: 0 = Solid black (default)
1 = Solid white
2 = HP-defined shading pattern
3 = HP-defined cross-hatch pattern
This command identifies the type of pattern to be applied onto the destination. Use this
command for selecting or changing the current pattern.
VECTOR GRAPHICS
The following are vector graphics commands within the PCL context.
HPGL/2 Plot Horizontal Size
ESC*C#K
Decimal:
027 042 #..# 075
Hex:
1B 2A 63 #..# 4B
# = horizontal size in inches
Default = width of the currently selected picture frame
Range = 0 tp 32767 (valid to 4 decimal places)
This command specifies the horizontal size of the HPGL/2 drawing being imported.
Summary of Contents for Intellibar M412
Page 115: ...9 2 HP PCL Graphics Commands Figure 9 1 Star Shaped Raster Image...
Page 122: ...HP PCL Graphics Commands 9 9 Figure 9 4 Example of Raster Graphic Image Data...
Page 126: ...HP PCL Graphics Commands 9 13 Figure 9 6 Shading Levels...
Page 127: ...9 14 HP PCL Graphics Commands Figure 9 7 Fill Patterns...
