9-22 HP PCL Graphics Commands
A parameter value of 0 (ESC*c0T) specifies that the picture frame anchor point should be
set to the cursor position. Sending a cursor move command prior to sending this command
places the picture frame anchor in the desired location. All parameter values other than
zero are ignored, but if you do not send a Set Picture Frame Anchor Point command, the
printer defaults the anchor point to the left edge of the logical page and the default top
margin.
NOTE:
The print direction command does not
affect the physical location of the anchor point or
the picture frame.
Using this command defaults the location of P1 and P2, resets the soft-clip window to the
PCL Picture Frame boundaries, clears the polygon buffer, and updates the HPGL/2 pen
position to the lower left corner of the picture frame (if entered with ESC%0B) as viewed
from the current orientation.
Picture Frame Horizontal Size (Decipoints)
ESC*C#X
Decimal:
027 042 99 #..# 088
Hex:
1B 2A 63 #..# 58
# = horizontal size in decipoints (1/720th inch)
Default = width of the current logical page
Range = 0 tp 32767 (valid to 4 decimal places)
This PCL command specifies the horizontal dimension of the window to be used for
printing an HPGL/2 plot.
NOTE:
The horizontal dimension specified is
parallel to the PCL X-axis when the print
direction is set to 0 degrees (the default).
Using this command defaults the location of P1 to the lower left corner of the picture frame
(and P2 to the upper right corner of the picture frame). This command also resets the soft-
clip window to the PCL Picture Frame boundaries, clears the polygon buffer, and updates
the HPGL/2 pen position to the lower left corner of the picture frame (P1) as viewed from
the current orientation.
If no horizontal picture frame frame size command is used, the printer defaults the picture
frame size to the logical page width. A parameter of 0 or the PCL reset, UEL, page length,
paper size, or orientation commands default the horizontal picture frame size.
Summary of Contents for Intellibar M412
Page 115: ...9 2 HP PCL Graphics Commands Figure 9 1 Star Shaped Raster Image...
Page 122: ...HP PCL Graphics Commands 9 9 Figure 9 4 Example of Raster Graphic Image Data...
Page 126: ...HP PCL Graphics Commands 9 13 Figure 9 6 Shading Levels...
Page 127: ...9 14 HP PCL Graphics Commands Figure 9 7 Fill Patterns...