IntelliTech Intellibar M412, Reference Manual, Page: 165 / 187

9-52 HP PCL Graphics Commands
Advance Full Page (PG)
This HPGL/2 command is ignored by the printer since it could cause undesirable results
when importing plots. A page eject can be accomplished only from the PCL printer
language mode.
The following PCL commands cause a conditional page eject, meaning that a page is
ejected if there is any printable data in the print buffer:

ESC E (reset)

UEL (Universal Exit Language)

Flush All Pages

Page Length

Page Size

Orientation

Paper Source
When a page is ejected using one of the above commands, the PCL cursor position is set to
the top of form on the new page.
An alternative method of ejecting a page from PCL is the Form Feed control code. A Form
Feed causes an unconditional page eject and advances the current active cursor position to
the top of form on the next page. The horizontal cursor position remains the same as before
the page eject.
NOTE:
The HPGL/2 pen position is not
affected by the Form Feed; it occupies the same
position on the next page.