9-10 HP PCL Graphics Commands
This prints the star as shown in Figure 9-5.
Figure 9-5 Example of Raster Graphic ImageTransfer
FILL GRAPHICS
PCL includes sequences for filling or shading rectangular areas with pre-defined patterns.
Rectangular areas are printed in the orientation of the addressable area. An area's width
extends in the positive X-direction of the PCL coordinate system; an area's height extends
in the positive Y-direction.
NOTE:
Rectangular areas are not affected by
the raster graphics resolution command.
Horizontal Rectangle Size (Decipoints)
This horizontal rectangle size sequence specifies the rectangle width in decipoints.
ESC*c#H
Decimal:
027 042 099 # 072
Hex:
1B 2A 63 # 48
#: Number of decipoints (1/720 inch)
The value field (#) is valid to four decimal places.
The printer converts the specified width to dots by rounding up to an integral number of
dots. For example, 5 decipoints, which corresponds to 2.08 dots on the printer, is converted
to 3 dots.
The factory default horizontal rectangle size is 0.
Summary of Contents for Intellibar M412
Page 115: ...9 2 HP PCL Graphics Commands Figure 9 1 Star Shaped Raster Image...
Page 122: ...HP PCL Graphics Commands 9 9 Figure 9 4 Example of Raster Graphic Image Data...
Page 126: ...HP PCL Graphics Commands 9 13 Figure 9 6 Shading Levels...
Page 127: ...9 14 HP PCL Graphics Commands Figure 9 7 Fill Patterns...
