IntelliBar M Series SAP Device Type Commands 11-5
INTELLIBAR M SERIES SAP DEVICE TYPE PRINT CONTROL
COMMANDS
In addition to the standard HP PCL5 commands supported by the IntelliBar M Series
ZITC_XXX Device Types, IntelliBar M Series printers use custom PCL Command
extensions that enable thermal label printing functions and provide access to internal
printer resident bar code fonts. In the SAP environment these Command extensions are
accessed through custom SAP “Z” print commands. Table 11-5 below lists the IntelliBar
M Series custom SAPScript Format Types, a description of the Command and the
corresponding PCL5 command extension in escape code sequence.
NOTE:
For greater detail about IntelliBar M
Series PCL command extensions, as well as
standard HP PCL commands, refer to the
relevant portion of Section 2 of the IntelliBar M
Series Programmer’s Reference Manual.
Тable 11-5 IntelliBar M Series PCL Command Extensions Cross Reference to
SAP Z Print Control Command Codes
Sap “Z” Print
Command
Code
Function
PCL Escape
Command Code
Setting/Disabling Variable Form Length
NOTE: The Variable Form Length command allowable range = 300 to 29,700 scan lines (= 1"
to 99"/ 2.5 cm to 252 cm) in increments of 300 scan lines (= 1"/ 2.5 cm). Use the next longer full inch
form length for form lengths that have fractional inches. For example, if form length = 8.5" then use
the 9” form length command, “ZSF09”.
ZSFVL
Set Variable Form Length = the last selected value
ESC!f1Z
ZSF01
Set Variable Form Length = 1"
ESC!f300Z
through
through
ZSF99
Set Variable Form Length = 99"
ESC!f29700Z
ZDFVL
Disable Variable Form Length
ESC!f0Z
Setting Print Speed
NOTE: The default Set Print Speed command is printer model dependent.
ZPS01
Set Print Speed = 0.6" (15 mm)/sec
ESC!p15S
ZPS02
Set Print Speed = 0.8" (20 mm)/sec
ESC!p20S
ZPS03
Set Print Speed = 1.2" (30 mm)/sec
ESC!p30S
ZPS04
Set Print Speed = 1.6" (40 mm)/sec
ESC!p40S
ZPS05
Set Print Speed = 2.4" (60 mm)/sec
ESC!p60S
ZPS06
Set Print Speed = 3.2" (80 mm)/sec
ESC!p80S
Summary of Contents for Intellibar M412
Page 115: ...9 2 HP PCL Graphics Commands Figure 9 1 Star Shaped Raster Image...
Page 122: ...HP PCL Graphics Commands 9 9 Figure 9 4 Example of Raster Graphic Image Data...
Page 126: ...HP PCL Graphics Commands 9 13 Figure 9 6 Shading Levels...
Page 127: ...9 14 HP PCL Graphics Commands Figure 9 7 Fill Patterns...
