IntelliTech Intellibar M412, Reference Manual, Page: 163 / 187

9-50 HP PCL Graphics Commands
Table 9-36
Default Settings (cont’d)
Function Command Default Condition
Polygon Mode PM Polygon buffer cleared
Raster Fill RF Solid black
Scalable or Bitmap Fonts SB0 Scalable fonts only
Scale SC User-unit scaling off
Screened Vectors SV No screening
Standard Font Definition SD Stick Font (11.5 point, 9
characters per inch, upright,
medium)
Absolute Character Size SI Turns off size transformation
Character Slant SL No slant
Symbol Mode SM Turns off symbol mode
Select Standard Font SS Standard font selected
Transparency Mode TR1 Transparency mode on
Transparent Data TD Normal printing mode
User-defined line type UL Defaults all 8 line types
In addition, the printer updates the carriage return point for text printing to the current pen
location.
The DF command does not affect the following HPGL/2 conditions:

locations of P1 and P2

current pen, its location, width, width unit selection, and up/down position

HPGL/2 drawing rotation
Initialize (IN)
This command resets all programmable HPGL/2 functions to their default settings. Use the
IN command to return the printer to a known HPGL/2 state and to cancel settings that may
have been changed by a previous command sequence. (The ESC E reset command issues
an automatic IN command.)
IN [ ; ]
NOTE: Once HPGL/2 mode is entered and
commands are issued, the HPGL/2 conditions
are no longer initialized. To place HPGL/2 into
the default state, send the IN command.