Intel SBXL52 - Server Compute Blade Hardware Maintenance Manual Download Page 9

Page: 9 / 126

SBXL52 safety and regulatory information

English translation of the notice above:

Device

User’s Information

Class A device

This device complies with RRL EMC and is operated
in commercial environment so that distributors or
users pay attention to this point.

If the product is sold or purchased improperly, please
exchange this product to what can be used at home.

Class B device

This device complies with RRL EMC and is operated
in a residential area so that it can be used at all other
location as well as residential area.

note: Class A device: operated in a commercial area. Class B device: operated in a residential area.

Summary of Contents for SBXL52 - Server Compute Blade































































































































Search results

Summary of Contents for SBXL52 - Server Compute Blade

Reviews:

Related manuals for SBXL52 - Server Compute Blade

Brands by name

Popular brands

Intel SBXL52 - Server Compute Blade, Hardware Maintenance Manual

Search results

Summary of Contents for SBXL52 - Server Compute Blade

Reviews:

Related manuals for SBXL52 - Server Compute Blade

Brands by name

Popular brands