manualshive.com logo in svg

Intel MFSYS25 - AXXPSU 1000W Power Supply Module, User Manual, Page: 95 / 164

Share
Download
Intel MFSYS25 - AXXPSU 1000W Power Supply Module User Manual Download Page 95

Intel® Modular Server System MFSYS25 User Guide

83

Note: To view a history of events, select the event tab on each component screen.

Figure 54.  Event Policy Record Window

Dashboard

The Dashboard provides a snapshot view of the overall system and component health, as 
well as a list of all required actions. Links for more details regarding the system/
component health or required actions are available. For information on the Dashboard, see 

“Dashboard” on page 48

.

Diagnostics

The Diagnostics feature enables an IT administrator to view and save system diagnostic 
information and the system event logs for select components. The Diagnostics page can be 
reached by selecting Reports -> Diagnostics from the left navigation menu.

Summary of Contents for MFSYS25 - AXXPSU 1000W Power Supply Module





































































































































































Reviews:

No comments