Intel MFSYS25 - AXXPSU 1000W Power Supply Module User Manual Download Page 82 | Manualshive

Page: 82 / 164

background image

70

Intel® Modular Server System MFSYS25 User Guide

Create a Hot Spare Drive

A global hot spare drive replaces a failed drive in any storage pool, whereas a dedicated
hot spare drive is assigned to a specific storage pool.

To create a hot spare drive, first select the hard drive from the system graphic. Next, select
Create Hot Spare from the action menu. Once the hot spare has been created, a successful
action dialog will be displayed and the information icon will change to the hot spare icon.
Under the General tab and in the component summary, the role will be displayed as either
a global or dedicated hot spare drive. Hot spare details are also included on the Spares tab
when a storage pool is selected. Global hot spares are listed on the Spares tab for all
storage pools. Dedicated hot spare drives are only listed on the Spares tab for the assigned
storage pool. The Spares tab displays the drive number, hot spare role (global versus
dedicated), drive manufacturer, product ID, serial number, firmware revision, size and
status.

Switches

Selecting the Switch tab displays the Intel® Gigabit Ethernet Switch configuration screen.
This screen enables an IT administrator to quickly configure virtual LANs (VLANs),
modify port settings, launch an advanced configuration UI, as well as view health, status
and product details.

Intel® Gigabit Ethernet Switch Module 1 and 2

To view current status, available actions and product details for all installed Intel®
Gigabit Ethernet Switch Modules, select Switch under the left navigation menu heading
System or select the specific switch module from the back of the system graphic. The
main screen graphic will change to display the back of the system with the selected switch
module highlighted in green. The action box, help box and informational tabs will update
to provide all available actions and information for the selected switch module. Current
health and product summary is quickly available by moving the mouse over the Health/
Information icon located on the selected switch module.

«
...
80
81
82
83
84
...
»

Summary of Contents for MFSYS25 - AXXPSU 1000W Power Supply Module





































































































































































Reviews:

No comments

Related manuals for MFSYS25 - AXXPSU 1000W Power Supply Module

ColorPASS-Z5000

Brand: Canon Pages: 130

Brand: Hanwha Pages: 3

Express5800/R310e-E4

Brand: NEC Pages: 86

eServer BladeCenter JS20 Type 8842

Brand: IBM Pages: 150

Brand: Vxl Pages: 19

eServer 380 xSeries

Brand: IBM Pages: 112

Brand: B&B Pages: 55

Brand: Digital Equipment Pages: 73

8668 - Eserver xSeries 232

Brand: IBM Pages: 182

Brand: Netstor Pages: 17

Connectware PortServer TS 8/16

Brand: Digi Pages: 106

imagePRESS Server G200

Brand: Canon Pages: 98

imagePRESS A3200

Brand: Canon Pages: 192

ColorPass-Z7400

Brand: Canon Pages: 210

PRIMERGY RX200 S6

Brand: Fujitsu Pages: 84

Brand: SEH Pages: 32

Brand: BCDVideo Pages: 157

Brand: Vitek Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands