manualshive.com logo in svg

Intel MFSYS25 - AXXPSU 1000W Power Supply Module, User Manual, Page: 72 / 164

Share
Download
Intel MFSYS25 - AXXPSU 1000W Power Supply Module User Manual Download Page 72

60

Intel® Modular Server System MFSYS25 User Guide

The following image displays the storage screen once a storage pool is present.

Figure 41.  Storage Screen with a Storage Pool Present

Storage Pool Actions

The Storage Pool Actions displayed to the right of the system graphic enable an IT 
administrator to modify existing storage pools, remotely identify drives contained in a 
storage pool and create virtual drives. For a complete list of actions, refer to the following 
table.

Table 5.  Storage Pool Actions Menu

Global Action Menu Item

Description

Create Storage Pool

Designate one or more drives as a storage pool. Global storage 
actions are available at all times on the storage screen.

Selected Storage Pool 

Action Menu Items

Description

Rename

Rename an existing storage pool. A dialog box will be displayed 
prompting the user for the new storage pool name.

Delete

Delete an existing storage pool. This action will delete all virtual 
drives contained in the selected storage pool and release the drives 
for future storage pool configuration. 

ALL DATA WILL BE LOST.

Identify

Illuminates the hard drive ID LED, which enables easy onsite 
identification of the drives included in the selected storage pool.

Summary of Contents for MFSYS25 - AXXPSU 1000W Power Supply Module





































































































































































Reviews:

No comments