manualshive.com logo in svg

Intel MFSYS25 - AXXPSU 1000W Power Supply Module, User Manual, Page: 91 / 164

Share
Download
Intel MFSYS25 - AXXPSU 1000W Power Supply Module User Manual Download Page 91

Intel® Modular Server System MFSYS25 User Guide

79

Table 16. Management Module Tabs

Intel

® 

Management Module Help

To quickly access additional help regarding the Intel

® 

Management Module screen, 

actions, and tabs, click on the Get Help button in the Management Module help box 
located under the actions box.

Intel

® 

Modular Server Fans and Power Supplies

Fans and power supplies are available for selection and viewing from the back system 
graphic. The IO Fan is located on the front of the system under the hard drives. To view 
current status, available actions and product details for all installed fans and power 
supplies, select the specific component from the system graphic. The main screen graphic 
will change to display the selected fan or power supply highlighted in green. The help box 
and informational tabs will update to provide all available information for the selected fan 
or power supply. Current health and product summary is quickly available by moving the 
mouse over the Health/Information icon located on the selected component.

Note: No actions are available for fans or power supplies. 

Intel

® 

Modular Server Fans and Power Supplies Details

The tabs displayed below the system graphic provide detailed information for the selected 
fan or power supply.  For a description of these tabs, refer to the following table.

Tab Heading

Description

General

The General tab displays:

•

Current status of the selected management module

•

Product data information, including manufacturer, firmware revision, 
serial number, product ID, etc.

Events

Displays all events for the selected Intel

® 

Management Module. 

Midplane

Displays product data information for the midplane, including 
manufacturer, firmware revision, serial number, part number, etc.

Summary of Contents for MFSYS25 - AXXPSU 1000W Power Supply Module





































































































































































Reviews:

No comments