Intel MFSYS25 - AXXPSU 1000W Power Supply Module User Manual Download Page 55

Page: 55 / 164

Intel® Modular Server System MFSYS25 User Guide

Option 1:

Connect the client system and the Intel

Management Module to an external

switch using two Ethernet cables, as illustrated in the following image.

Option 2:

Connect the client system directly to the Intel

Management Module using a

cross-over cable, as illustrated in the following image.

Remote Client System Requirements

This section describes the minimum system requirements for a client computer that is
accessing the Intel

Modular Server Control user interface through a web browser.

AF002069

Switch

AF00206

Cross-over Cable

Summary of Contents for MFSYS25 - AXXPSU 1000W Power Supply Module





































































































































































Search results

Summary of Contents for MFSYS25 - AXXPSU 1000W Power Supply Module

Reviews:

Related manuals for MFSYS25 - AXXPSU 1000W Power Supply Module

Brands by name

Popular brands

Intel MFSYS25 - AXXPSU 1000W Power Supply Module, User Manual

Search results

Summary of Contents for MFSYS25 - AXXPSU 1000W Power Supply Module

Reviews:

Related manuals for MFSYS25 - AXXPSU 1000W Power Supply Module

Brands by name

Popular brands