Intel MFSYS25 - AXXPSU 1000W Power Supply Module, User Manual, Page: 38 / 164

26 Intel® Modular Server System MFSYS25 User Guide
Three power supply modules will support four to six compute modules (in any slot) plus
all other modules in the system.
Any additional power supply modules above the minimum required (based on
configuration) will provide redundancy.
Installing a Power Supply Module
1. Review the safety and ESD information at the beginning of this manual and in the
appendices.
2. Locate the power supply module bay and remove any installed module or filler
module. For instructions on removing a power supply module, see “Removing a
Power Supply Module” on page 27 . To remove a filler module, press the retention
lever latch (see letter “A” in the following figure) to release the filler module from the
module bay. Slide the filler module out of the bay (see letter “B”).
Figure 17. Removing Filler Module
AF002420
B
A