Intel MFSYS25 - AXXPSU 1000W Power Supply Module, User Manual

Page: 34 / 164

22 Intel® Modular Server System MFSYS25 User Guide
Installing and Removing the Backup Battery
Installing a Backup Battery
1. Review the safety and ESD information at the beginning of this manual and in the
appendices.
2. Remove the storage controller from the system. For instructions, see “Removing a
Storage Controller” on page 20 .
Warning: You must replace the storage controller with a filler panel or another
storage controller within two minutes.
3. Place the storage controller sideways on a work surface so that it’s largest surface area
is touching the work surface and the retention lever is on the top.
4. With a Phillips* screwdriver, remove the screw securing the top cover to the storage
controller (see letter “A” in the following figure). Push cover rearward (see letter “B”)
and lift off of module (see letter “C”).
Figure 13. Removing Top Cover from Storage Controller
5. Slide the cover towards the rear of the storage controller and lift upward.
A
B
C
AF002563