Intel® Server System M50CYP2UR Family System Integration and Service Guide
122
6.11
Server Board Replacement
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* head screwdriver #2
Figure 161. Server Board Removal
1.
Power off system and remove power cords from each power supply module installed.
2.
Disconnect all externally attached cables.
3.
Remove the system top cover (see
Section 6.1.1
4.
Remove the air duct (see
Section 6.2.1
5.
Remove power supply modules (see
Section 6.6
6.
Remove the system fan assembly (see
Section 6.4
7.
Disconnect all cables attached to add-in cards and I/O modules.
8.
Remove riser card assemblies (see
Section 3.3.1
9.
Remove all options installed onto the server board including (if installed): TPM Module, M.2 SSD,
Internal-mounted U.2 SSD, Intel® VROC 7.5 key, OCP* adapter, midplane card, Intel® SAS interposer card,
SAS RAID module, and Intel® SAS expander card.
10.
Remove processors (see
Section 6.7
11.
Remove all DIMMs (see
Section 6.5
12.
Disconnect and clear from the server board area all cables attached to connectors on the server board.
13.
Remove 16 screws used to secure the server board to the chassis (see L
etter ‘A’
).
14.
Slide the server board slightly towards the front of the chassis to disengage from the chassis cut-outs the
connectors on the rear edge of the board.
15.
Carefully lift the server board from the chassis and place it into an anti-static bag.
