Intel® Server System M50CYP2UR Family System Integration and Service Guide
115
Figure 153. 3.5" Drive Carrier
to 2.5” SSD
Bracket
–
Mount Bracket Assembly to Carrier
4.
Position the rear drive connector towards the back of the drive carrier
5.
Align and position the mounting holes on the left side of the drive bracket over the mounting tabs on the
drive carrier side rail (see Letter E).
6.
Lower the other side of the drive into the carrier and press down until all mounting tabs lock in place (see
Letter F).
7.
Turn the drive assembly over.
Figure 154
. 3.5”
Drive Carrier
to 2.5” SSD
Bracket
–
Secure SSD to Carrier
8.
Using two (2) screws, secure the SSD to the carrier side rail (see Letter G). Tighten to 8 in-lb.
