Intel E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY Datasheet Download Page 78

Page: 78 / 118

Signal Definitions

Notes:

For this processor land on the Quad-Core Intel® Xeon® Processor 5400 Series, the maximum number of

symmetric agents is one. Maximum number of priority agents is zero.

For this processor land on the Quad-Core Intel® Xeon® Processor 5400 Series, the maximum number of

symmetric agents is two. Maximum number of priority agents is zero.

For this processor land on the Quad-Core Intel® Xeon® Processor 5400 Series, the maximum number of

symmetric agents is two. Maximum number of priority agents is one.

TMS

TMS (Test Mode Select) is a JTAG specification support signal used by

debug tools.
See the Debug Port Design Guide for Intel

5000 Series Chipset

Memory Controller Hub (MCH) Systems (External Version) for further

information.

TRDY#

TRDY# (Target Ready) is asserted by the target to indicate that it is

ready to receive a write or implicit writeback data transfer. TRDY#

must connect the appropriate pins of all FSB agents.

TRST#

TRST# (Test Reset) resets the Test Access Port (TAP) logic. TRST#

must be driven low during power on Reset.

CCPLL

The Quad-Core Intel® Xeon® Processor 5400 Series implements an

on-die PLL filter solution. The V

CCPLL

input is used as a PLL supply

voltage.

VCC_DIE_SENSE
VCC_DIE_SENSE2

VCC_DIE_SENSE and VCC_DIE_SENSE2 provides an isolated, low

impedance connection to the processor core power and ground. This

signal should be connected to the voltage regulator feedback signal,

which insures the output voltage (that is, processor voltage) remains

within specification. Please see the applicable platform design guide

for implementation details.

VID[6:1]

VID[6:1] (Voltage ID) pins are used to support automatic selection of

power supply voltages (V

). These are CMOS signals that are driven

by the processor and must be pulled up through a resistor.

Conversely, the voltage regulator output must be disabled prior to the

voltage supply for these pins becomes invalid. The VID pins are

needed to support processor voltage specification variations. See

Table 2-4

for definitions of these pins. The VR must supply the

voltage that is requested by these pins, or disable itself.

VID_SELECT

VID_SELECT is an output from the processor which selects the

appropriate VID table for the Voltage Regulator. This signal is not

connected to the processor die. This signal is a no-connect on the

Quad-Core Intel® Xeon® Processor 5400 Series package.

VSS_DIE_SENSE
VSS_DIE_SENSE2

VSS_DIE_SENSE and VSS_DIE_SENSE2 provides an isolated, low

impedance connection to the processor core power and ground. This

signal should be connected to the voltage regulator feedback signal,

which insures the output voltage (that is, processor voltage) remains

within specification. Please see the applicable platform design guide

for implementation details.

VTT

The FSB termination voltage input pins. Refer to

Table 2-12

for

further details.

VTT_OUT

The VTT_OUT signals are included in order to provide a local V

for

some signals that require termination to V

on the motherboard.

VTT_SEL

The VTT_SEL signal is used to select the correct V

voltage level for

the processor. VTT_SEL is connected to VSS on the Quad-Core Intel®

Xeon® Processor 5400 Series package.

Table 5-1.

Signal Definitions (Sheet 8 of 8)

Name

Type

Description

Notes

Summary of Contents for E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY























































































































Search results

Summary of Contents for E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY

Reviews:

Related manuals for E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY

Brands by name

Popular brands

Intel E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY, Datasheet

Search results

Summary of Contents for E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY

Reviews:

Related manuals for E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY

Brands by name

Popular brands