Intel E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY Datasheet Download Page 102 | Manualshive

Page: 102 / 118

background image

Features

102

Enhanced Intel SpeedStep Technology creates processor performance states (P-states)
or voltage/frequency operating points which are lower power capability states within
the Normal state (see

Figure 7-1

for the Stop Clock State Machine for supported P-

states). Enhanced Intel SpeedStep Technology enables real-time dynamic switching
between frequency and voltage points. It alters the performance of the processor by
changing the bus to core frequency ratio and voltage. This allows the processor to run
at different core frequencies and voltages to best serve the performance and power
requirements of the processor and system. The Quad-Core Intel® Xeon® Processor
5400 Series has hardware logic that coordinates the requested voltage (VID) between
the processor cores. The highest voltage that is requested for either of the processor
cores is selected for that processor package. Note that the front side bus is not altered;
only the internal core frequency is changed. In order to run at reduced power
consumption, the voltage is altered in step with the bus ratio.

The following are key features of Enhanced Intel SpeedStep Technology:

• Multiple voltage/frequency operating points provide optimal performance at

reduced power consumption.

• Voltage/frequency selection is software controlled by writing to processor MSR’s

(Model Specific Registers), thus eliminating chipset dependency.

— If the target frequency is higher than the current frequency, V

CC

is incremented

in steps (+12.5 mV) by placing a new value on the VID signals and the

processor shifts to the new frequency. Note that the top frequency for the

processor can not be exceeded.

— If the target frequency is lower than the current frequency, the processor shifts

to the new frequency and V

CC

is then decremented in steps (-12.5 mV) by

changing the target VID through the VID signals.

§

«
...
100
101
102
103
104
...
»

Summary of Contents for E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY























































































































Reviews:

No comments

Related manuals for E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY

Brand: 3xLogic Pages: 2

Brand: Analog Devices Pages: 76

Brand: Supermicro Pages: 16

Brand: HARTING Pages: 13

Brand: ebm-papst Pages: 11

Brand: YASKAWA Pages: 15

Brand: DAD Pages: 16

Brand: Addonics Technologies Pages: 1

Brand: XtendLan Pages: 228

JetStor NAS 724UX

Brand: AC&NC Pages: 117

Brand: 3Com Pages: 53

Brand: ICP DAS USA Pages: 31

CL-SOM-AM57 Series

Brand: CompuLab Pages: 79

Brand: Renesas Pages: 40

RDGD3160I3PH5EVB

Brand: NXP Semiconductors Pages: 21

Brand: Robotis Pages: 10

Brand: JOBO Pages: 12

Brand: Cognex Pages: 57

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands