Intel E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY Datasheet Download Page 26 | Manualshive

Page: 26 / 118

background image

Quad-Core Intel® Xeon® Processor 5400 Series Electrical Specifications

26

2.11

Mixing Processors

Intel supports and validates dual processor configurations only in which both
processors operate with the same FSB frequency, core frequency, power segments, and
have the same internal cache sizes. Mixing components operating at different internal
clock frequencies is not supported and will not be validated by Intel. Combining
processors from different power segments is also not supported.

Note:

Processors within a system must operate at the same frequency per bits [12:8] of the

CLOCK_FLEX_MAX MSR; however this does not apply to frequency transitions initiated

due to thermal events, Extended HALT, Enhanced Intel SpeedStep Technology

transitions, or assertion of the FORCEPR# signal (See

Chapter 6

).

Not all operating systems can support dual processors with mixed frequencies. Mixing
processors of different steppings but the same model (as per CPUID instruction) is
supported. Details regarding the CPUID instruction are provided in the AP-485 Intel

®

Processor Identification and the CPUID Instruction application note.

2.12

Absolute Maximum and Minimum Ratings

Table 2-11

specifies absolute maximum and minimum ratings only, which lie outside

the functional limits of the processor. Only within specified operation limits, can
functionality and long-term reliability be expected.

At conditions outside functional operation condition limits, but within absolute
maximum and minimum ratings, neither functionality nor long-term reliability can be
expected. If a device is returned to conditions within functional operation limits after
having been subjected to conditions outside these limits, but within the absolute
maximum and minimum ratings, the device may be functional, but with its lifetime
degraded depending on exposure to conditions exceeding the functional operation
condition limits.

At conditions exceeding absolute maximum and minimum ratings, neither functionality
nor long-term reliability can be expected. Moreover, if a device is subjected to these
conditions for any length of time then, when returned to conditions within the
functional operating condition limits, it will either not function or its reliability will be
severely degraded.

Although the processor contains protective circuitry to resist damage from static
electric discharge, precautions should always be taken to avoid high static voltages or
electric fields.

«
...
24
25
26
27
28
...
»

Summary of Contents for E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY























































































































Reviews:

No comments

Related manuals for E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE TRAY

Brand: 3Com Pages: 8

Brand: IDT Pages: 281

DMX-Universal-Demux

Brand: DMX4ALL Pages: 17

Brand: Rockwell Automation Pages: 108

Asynchronous SH7145F

Brand: Renesas Pages: 17

Brand: Belkin Pages: 72

Brand: Fracarro Pages: 12

MultiConnect SE MTS2EA

Brand: Multitech Pages: 2

Brand: NA Pages: 22

Fieldpoint cFP-RTD-124

Brand: National Instruments Pages: 15

eBOX532-100-FL Series

Brand: AXIOMTEK Pages: 2

UniFi Cloud Key

Brand: Ubiquiti Pages: 13

Brand: A4Tech Pages: 8

Brand: Z3 Technology Pages: 67

Brand: Nakayo Pages: 119

Brand: Idis Pages: 16

Brand: ZIMO Pages: 13

Brand: ADS Technologies Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands