INSYS GSM small 2.0
AT Command Reference
Command
Description
AT^SMONG
Displaying GPRS-specific cell information in a single line
Response:
"GPRS Monitor", below the column titles and # cell #
and in the bottom line the cell data (in one line), e.g.:
GPRS Monitor
BCCH G
PBCCH PAT MCC MNC
NOM
TA
RAC # Cell #
0637 1
-
4 234 05 2 00 0B
Columns of the cell info table
<Title>
Ex. Possible values / meaning
BCCH
0637 ARFCN of BCCH
G
0
GPRS / EDGE not possible in cell currently used
1
GPRS usage possible in cell currently used
2
GPRS is used
3
EDGE usage possible in cell currently used
4
EDGE is used
PBCCH
-
With PBCCH display of ARFCN, else “-“ or
with frequency hopping display of "H"
Note:
If the network operates with PBCCH, the correct value can only be
displayed if the engine is attached.
PAT
Priority Access Threshold (GSM Rec.04.08)
0
Packet access not permitted in cell
1
Packet access not permitted in cell (spare)
2
Packet access not permitted in cell (spare = "000")
3
Packet access permitted in cell for priority 1
4
Packet access permitted in cell for priority 1 and 2
MCC
234 Mobile Country Code.
MNC
05 Mobile Network Code
NOM
2
Network Operating Mode (1…3)
TA
00 Value for Timing Advance (
RAC
0B Routing Area Code (hexadecimal value)
AT^SMONG
=<table>
[,
<pe-
riod>]
Displaying GPRS-specific cell information
Parameters:
<table>
1 cell information table.
<period>
Display interval in seconds, optional
If
<period>
is not specified, the cell data is displayed as for entering
AT^SMONG (see above).
If
<period>
is specified, the cell data are updated in the specified interval.
Column titles are repeated in every tenth line.
Note: Stop the updated display with "AT".
AT^SMONG=?
Testing GPRS-specific cell information query
Response: ^SMONG:
<table>
,
<period>
77
