Functions
INSYS GSM small 2.0
In order to configure an SMS message, en-
ter the destination number using the com-
mand
Finish the destination number entry in in-
ternational format in quotation marks with
the Enter key
<CR>
.
AT+CMGW=<“number“>
Following the prompt
>
, enter the text of
the SMS and finish the entry with
CTRL-Z
(not with the Enter key!).
>SMS Text
In order to save the previous settings, use
the command
AT&W
The alarm function itself can be configured after the presettings have
been made:
In order to send the SMS in memory loca-
tion 1
(AT+CMSS=1)
to the destination
stored there upon DTR activation, use the
command
AT^SCFG=“AutoExec“,1,0
,0,0,“AT+CMSS=1“
Above command ignores already existing data connections, i.e. the SMS
dispatch would fail in this case.
In order to wait for the end of an already
existing data connection, use the command
AT^SCFG=“AutoExec“,1,0
,0,1,“AT+CMSS=1“
In order to terminate an already existing
data connection in case of an alarm, use
the command
AT^SCFG=“AutoExec“,1,0
,0,2,“AT+CMSS=1“
In order to disable the function, use the
command
AT^SCFG=“AutoExec“,0,0
,0
The response at the serial interface is
The message
+CMSS: 23
indicates the the
number of sent messages up to now with
this SIM card.
^SCFG: “Auto-
Exec“,1,0,0,0,“AT+CMSS
=1“
OK
+CMSS: 23
All settings configured with the command
AT^SCFG
will only be saved af-
ter executing the command
AT^SMSO
.
In order to save the settings, use the com-
mand
AT^SMSO
52
