Functions
INSYS GSM small 2.0
11.11
Automatic execution of AT commands
The command
AT^SCFG
enables to execute functions (AT commands) time-
controlled or via activation of the DTR control line.
A total of 3 actions can be configured for time-controlled processes. One action
can be configured for being triggered via DTR. The internal timers for time-
controlled functions start over following a restart or reset. This is also valid for en-
tering
ATZ
or
AT&F
!
The most important functions for an application are mentioned using examples in
the following. These examples are also used in the HSComm for GSM:
Automated PIN entry and login after restart
Automatic reset
Alarm via DTR control line
If all functions are configured in the configuration software HSComm, all memory
locations are used.
The settings of this command are stored using the command
AT^SMSO
. This command shuts down the INSYS GSM small 2.0. It can
be restarted by briefly disconnecting the power supply.
48
