INSYS GSM small 2.0
AT Command Reference
Command
Description
5
2000 bytes/hour (~ 4.4 bps)
6
5000 bytes/hour (~ 11.1 bps)
7
10,000 bytes/hour (~ 22 bps)
8
20,000 bytes/hour (~ 44 bps)
9
50,000 bytes/hour (~ 111 bps)
10 100,000 bytes/hour (~ 0.22 kbps)
11 200,000 bytes/hour (~ 0.44 kbps)
12 500,000 bytes/hour (~ 1.11 kbps)
13 1,000,000 bytes/hour (~ 2.2 kbps)
14 2,000,000 bytes/hour (~ 4.4 kbps)
15 5,000,000 bytes/hour (~ 11.1 kbps)
16 10,000,000 bytes/hour (~ 22 kbps)
17 20,000,000 bytes/hour (~ 44 kbps)
18 50,000,000 bytes/hour (~ 111 kbps)
31 Best effort
With parameters not entered, this parameters are reset to HLR-stored, sub-
scribed default values (SIM contract).
In order to disable the minimum requirements, enter AT+CGQMIN=<cid>,
AT&F or ATZ.
The setting is not stored with AT&W.
AT+CGQREQ?
Displaying the Quality of Service profile (requested)
AT+CGQREQ=[<cid
>[,<precedence>
[,<delay>[,<rel
iabil-
ity>[,<peak>[,<
mean>]]]]]]
Defining the Quality of Service profile (requested)
This command allows the application to request a certain QoS from the
provider. This should offer better conditions than the minimum acceptable
profile (AT+CGQMIN).
<cid>
Index of a defined PDP context (refer to
AT+CGDCONT
),
for which the requested profile is to be valid.
Refer to the command
AT+CGQMIN
above for further parameters.
With parameters not entered, this parameters are reset to HLR-stored, sub-
scribed default values (SIM contract).
In order to disable the minimum requirements, enter AT+CGQMIN=<cid>,
AT&F or ATZ.
The setting is not stored with AT&W.
AT+CGPADDR=[<ci
d>[<cid>[,...]]
]
Displaying the PDP address
Displays
<PDP_addr>
defined with
AT+CGDCONT
of PDP context indexed
with
<cid>
.
The setting is not stored with
AT&W
.
AT+CGREG?
Querying the GPRS network registration state
75
