INSYS GSM small 2.0
Functions
In order to configure the number of ring tones
after which the INSYS GSM small 2.0 answers
and accepts the connection, use the command
Replace
<n>
with the number of ring tones (
<n>
= 2…255,
<n>
= 0 deactivates the function).
Take the
AT&D
setting in account.
ATS0=<n>
In order to change to command mode during a
data connection, use the escape sequence
No data must be transmitted for 1 second be-
fore and after that the INSYS GSM small 2.0
changes to command mode.
+++
In order to change from command mode to
normal data transmission again, use the com-
mand
ATO
In order to terminate a connection and cause the
INSYS GSM small 2.0 to hang up, use the com-
mand
Terminating the connection via DTR Drop might
also be possible.
ATH
11.8
Establishing a PPP Data Connection
Information about establishing a PPP data connection can be found in the add-on
manual INSYS GPRS/EDGE Devices as GPRS/EDGE Terminal on the enclosed CD.
45
