INSYS GSM small 2.0
Functions
11.10
Sending an SMS Manually
It is possible to send an SMS manually with the INSYS GSM small 2.0.
Configuration with HSComm
A manually triggered SMS dispatch with the HSComm software is not
possible.
Configuration with AT commands
In order to configure SMS text mode, use
the command
AT+CMGF=1
In order to configure the number of the
short message center, use the command
Replace
<SMSCno>
with the number of the
short message center (SMS Center) in in-
ternational format in quotation marks (e.g.
"+49172…").
AT+CSCA=<“SMSCno“>
In order to send an SMS message, enter
the destination number using the command
Finish the destination number entry in in-
ternational format in quotation marks with
the Enter key
<CR>
.
AT+CMGS=<“number“>
Following the prompt
>
, enter the text of
the SMS and finish the entry with CTRL-Z
(not with the Enter key!).
>SMS Text
The INSYS GSM small 2.0 starts to send the SMS now.
47
