INSYS GSM small 2.0
Functions
11.12.3
Sleep Modes
The sleep modes only work correct, if the PIN authentication of the
SIM card has been performed. Either by entering the PIN with
AT+CPIN
or by disabling the PIN request.
11.12.3.1
Configuration with HSComm
n using the HSComm software is not pos-
Confi
s
In order to disable sleep mode, use the
command
AT+CFUN=1
Sleep Mode Off (Normal Mode)
A configuration of this functio
sible.
guration with AT command
11.12.3.2
Non-Cyclic Sleep Mode
The serial interface is disabled in this sleep mode. Every "wake-up event", which is
possible in this mode, (except AT commands) causes the INSYS GSM small 2.0 to
change into normal mode.
Configuration with HSComm
A configuration of this function using the HSComm software is not pos-
sible.
Configuration with AT commands
In order to enable non-cyclic sleep mode,
use the command
AT+CFUN=0
57
