INSYS GSM small 2.0
Mounting
Mounting the device to the DIN rail
How to mount the INSYS GSM small 2.0 to a DIN rail:
1.
Position the device at the DIN rail as seen in the following diagram.
There are two snap-in hooks at the upper and lower edge of the DIN
rail groove of INSYS GSM small 2.0. Hook the upper one into place
behind the upper edge of the DIN rail.
27
2.
Lift the INSYS GSM small 2.0 perpendicular to the DIN rail until the
two lower, flexible snap-in hooks engage in the DIN rail.
The INSYS GSM small 2.0 is now readily mounted.
Connecting the power supply
The device has already been mounted to the DIN rail.
The power supply is connected and switched off.
1.
Connect the ground lead of the power supply to the terminal "GND".
2.
Connect the plus pole of the power supply to the terminal for the
power supply.
The INSYS GSM small 2.0 is now connected to the power supply.
